Yes, I Really am Leaving

I thought this was a particularly interesting section of warp. I've been experimenting with form and freedom in this warp and in The Big Commission blanket. Some areas have a controlled pattern with adjacent sections wound randomly. I haven't decided if I totally like it, but I intend to experiment some more before I make up my mind.

Where many folks are challenged by using lots of bright colors, I struggle with pastels and light colors.


Here it is just cut off the loom. I flipped it over to take this picture because I didn't want any of the lose threads to show.


I won't be doing any of the finishing now. I will take it with me on the trip and work on it as I go. I'll be interested to see how much it shrinks and if I will be able to get 2 towels out of the warp.
I did have some problems with my edges, but I won't go into that now. I want to mull it over a bit.

What's true is there are always little glitches to work out when you switch to a new fiber. At least that has always happened for me.

OK, is this the official goodbye?
No, I'll be back in a few hours. I have more to say.

Must ...Not ...Weave... Must ...Get...Ready...For...Trip

I never thought weaving could be a form of procrastination! I am so jazzed about seeing how this 8/2 unmercerized cotton in turned weft ikat weaves up that I can't seem to turn my attention to getting ready for my 3 cities in 3 weeks trip. (coming up in 5 days!) But now I have to take this piece with me. It is only a 3 yard warp after all...


The weaving light was on, so the color is distorted, but I just had to try a little weaving before I officially start my day. The sett is 24 epi, and I thought I would try using the same yarn (since I have 25# of it) for the weft. I wondered if it would wash out the ikat too much, but I don't think so from looking at this first inch or so.

White (or off white) goes a long way--especially here in the Northwest. But for towels, I think white is an exception.

OK, I really have to make my train reservations now (Baltimore to NC and then NYC to Springfield MA), but I'm sure to hit the loom again before the day is over.

And The Beat Goes On

Once again, I am faced with a weft choice; and once again, I decide to try all the colors. The warp is 5/2 cotton, and the weft is 20/2 cotton doubled. I couldn't stop weaving. It is slower to stop and change colors every few inches, but it also affords the necessary breaks to minimize the impact on the old body.

Another trick I use during the weaving process is to wind an inch of ikat whenever I take a break. By the time I finish weaving the blanket, I have the next warp all ready to go.

I got so excited to see it off the loom! You should have seen me running around the place looking for a spot to hang it or drape it so I could snap a picture.

Oh yes, I was also equally excited to see what 8/2 ikat would look like on the loom.


Two warps with one picture!

I can hardly wait to see and feel the blanket after washing, but I promised myself I wouldn't work on it until I got to Baltimore. I will have some days there before I deliver the blanket to its owner, and it will be nice to have a project to work on. Besides, I now have this other test warp crying out for completion.

Promotional Considerations

One of the things that has slowed down my weaving progress this week was the need to complete and send out a portfolio displaying the Color Horoscope Weaving. I procrastinated on it a couple of months, and finally had to just do it. First I had to locate and order archival quality black sleeve inserts and archival plastic sleeves from Light Impressions.


I poured through my thousands of digital images and selected 60 or so and printed them out myself with my Cannon Pixma MP500. It's been working really well for me this past year, and the learning curve isn't very steep at all. I just checked the Cannon website, and it seems a year old printer is less than half the price is was! (although the ink is still just as expensive)


I know it is possible and probably better in every way to do the whole layout on photoshop, but I certainly have no idea how to do that. I haven't gotten beyond "cut and paste" (cut with scissors and paste with a dry adhesive by Bainbridge). When I finished, I had 23 pages and scanned them all.


These are just a few of the pages that appealed to me this evening. Since they are scanned, they are not as sharp and clear as the originals. Having the scanned copies will make it easier to duplicate by hand or have them printed in the future. The background paper really is black, not the strange dark reddish color.

The good news is I shipped it off on Friday. Funny how that nagging backache that had bothered me these past couple months just seemed to disappear as I walked home from the UPS shipping station. Now I just have to wait and see what sprouts from these digital seeds.

Recalculation/Rethread/Rethread

When I got to the halfway mark in the reed, I realized I didn't have enough dents. Ames had written a comment asking about reed size which made me stop and consider how I was going to put a 42" warp in a 40" reed. Although my loom is 48", only my 12 dent reed is 48". I thought by unthreading and removing an inch of the border on each side, I would have enough.

When I got to the halfway mark in the reed for the second time, I realized once again I didn't have enough dents! Did I miscount? Did I make a mistake in the initial winding? Am I crazy?


Then it hit me. Duh! There are 10 planet thread groups which are not doubled in the reed. It is as if the weaving is 19" wide instead of 18" wide. (doubled for the baby blanket makes the warp 38"). I would have to remove the entire border. I did leave 4 turquoise threads at each edge as a selvage, and I will add a floating selvage thread as well. I plan to use a turquoise weft to give a nice look to the edge as long as I don't have a border.

I plan to put the cross back in the borders and re-chain them for use in another weaving sometime. Perhaps I will invest in a 48" 10 dent reed:)

The 3rd threading worked. Weaving to begin later today.


I finally cut the Tree Peony dead heads. I was surprised to discover I had had 17 blooms.

Solstice

Here is my first 5/2 cotton baby blanket going on the loom. This blanket will be 42" on the loom with a sett of 20 epi. When I use the 20/2 cotton tripled, the blanket is 36" wide, sett 24 epi. My goal is to take this with me when I go back East in 10 days.

The color isn't very good here, but it shows off a little problem I had to solve. You can see the 2 green ends that come together in the center. They are both thread #1 of the horoscope. The baby blanket is actually a mirror image 360 ends x 2. What I had to do is remove one of the green threads (I picked the one on the right) and insert it as thread 360 on the right side. It was easily done, but it stopped me for a day.

Here is a surprise, the cobalt ikat dyed 8/2 cotton all dry. It got much lighter. Sadly I won't have time to weave something with it before I leave. What the yarn lost in depth of color, it gained in softness. I think it will make wonderful towels.


While the cotton was drying on the patio, one of the Japanese Tree Peony dead heads called out to me.

Oh, a piece of good news: I just found out the 50# suitcase containing all of my supplies, slides, and weaving samples for the NEWS Conference arrived safely in Massachusetts and is awaiting my arrival.

Dye Day #4

I don't think I ever showed you a picture of how I wrap my skeins for ikat dyeing. I usually make the skeins 60" around. I buy some nice sturdy garbage bags, cut them crosswise in about 2" wide strips and wrap clockwise. It really doesn't matter which way you wrap.

Someone gave me a roll of Japanese Ikat wrap. I had never used it before and wanted to give it a try. It is a lot stiffer than the garbage bags and has a tendency to split vertically. It makes wrapping more difficult, but attaching the end of wrap is easier. The clear shiny is the official ikat tape. All of the ikat tape skeins are 50" around, so I could tell the difference between the two after I unwrapped them.

In this dye pot, we have 8/2 unmercerized cotton and a little bamboo and tencel. In a wild moment of equal practicality and impracticality, I bought 25# of unmercerized undyed cotton. Time will tell if I was wise or foolish. I was curious how it would take the dye having never dyed unmercerized cotton before. Then I got this crazy idea: Hey, what if I dyed a color other than black? Wildly I purchased cobalt!

Here you see me in my official dyeing shirt as I am removing all of the dyed skeins from the dye pot. I have to say this was the least messy and least anxiety producing dye day yet. I never wanted this to happen. I wanted to remain a virtual dyer forever. Who knows, perhaps my days as a virtual quilter and virtual gardener are numbered?

And here they are all unwrapped. The lower skeins are the tencel and bamboo. You can tell already the tencel and bamboo take the dyes much better, richer, deeper. I am sure they will all lighten up as they dry. It's been rather cool and damp, so it may take a couple of days before they dry. I'm not sure when I will get a test warp on the loom since I am in early countdown for my next teaching trip, and both looms have new warps on them already.